FN Wheels - BFD
Look past the strikingly aggressive design of the BFD by FN Wheels and you will find one of the best-engineered wheels currently available. The BFD is manufactured using a state of the art counter-pressure cast method that minimizes porosity and maximizes uniformity. Unlike typical gravity cast wheels, counter-pressure cast wheels such as the BFD are lighter, stronger, and are more environmentally friendly to produce.
Each BFD wheel is tested to meet or exceed the standards outlined by the strict JWL-T and VIA requirements from Japan. The BFD is also produced to meet or exceed the requirements set forth by the SEMA standard of SAE J2530. Meeting the SAE J2530 standard is noteworthy, because this is currently a voluntary standard not mandated by any governing body. We have engineered the BFD to surpass the most stringent tests in the industry.
Simply speaking, aside from the stunning aesthetics, each FN Wheels BFD is designed to PERFORM.
- Finish: Matte Black/Matte Bronze/Titanium Silver/Graphite Gunmetallic
- Size: 18x9
- Bolt Pattern: 6x139.7
- Bore: 108.3mm
- Backspacing: 5"
- Offset: 0mm
The Toyota factory lug nuts are not compatible with these wheels. The proper tuner style lug nuts are available in the drop down menu.
Most new vehicles come equipped with a Tire Pressure Monitoring System. This system was designed to monitor the air pressure inside your tires. This is done through sensors that communicate with your vehicles warning system to alert you when the pressure is low.
Please note: These sensors will require reprogramming when switching between summer/winter wheels. It is not mandatory to install sensors onto your wheels but failure to do so will result in your vehicles TPMS warning light to remain activated until the issue has been resolved.